English
| Quantity: | |
|---|---|
Product Introduction
During long-hour farm spraying and heavy-load operation, the original washer will gradually wear thin, deform or lose cushioning effect. Timely replacement effectively solves drone jitter, abnormal noise and unstable hovering, greatly improving flight safety and spraying consistency.
Made of high‑wear‑resistant material, anti‑abrasion for long‑hour farm working
CW clock‑wise rotation specification, strict dimensional tolerance for precise fit
Effectively absorb mechanical vibration, stabilize propeller running status
Direct‑fit replacement part, no modification required for installation
Prevent metal‑to‑metal friction, extend service life of propeller clamp and shaft assembly
Technical Parameters
Product Name: 60-Inch CW Propeller Washer
Part Number: 02-001-11012
Rotation Direction: CW (Clockwise)
Applicable Blade Size: 60-inch agricultural drone propeller，P60Pro/P60/P120/P200/P150/P150UItra/P150Pro
Material: High wear-resistant anti-slip polymer material
Feature: Anti-abrasion, shock absorption, anti-deformation, high toughness
Installation Position: Between propeller blade and propeller clamp
Applicable Device: Industrial agricultural sprayer drone
Replacement Type: Direct OEM replacement, no modification needed
Product Uses
Agricultural drone daily maintenance: Regular replacement of worn gaskets during routine inspection
After heavy-load operation: Replacement after long-time spraying, fertilizing and seeding missions
Vibration & jitter troubleshooting: Solve abnormal vibration, blade shaking and unstable flight
Propeller overhaul replacement: Must-replace accessory when changing 60-inch CW propellers or blade clamps
Field emergency repair: Quick on-site replacement to reduce downtime of farm operation
Q1: What will happen if the propeller washer is worn out?
A1: A worn or deformed gasket will cause uneven blade fit, increase flight vibration and noise, lead to unstable hovering, and even cause blade loosening under high speed, bringing flight safety risks.
Q2: What is the difference between CW and CCW washers?
A2: CW is for clockwise rotating propellers, while CCW is for counter-clockwise ones. They correspond to different motor positions and cannot be mixed installed, otherwise vibration and poor fit will occur.
Q3: Do I need to replace the washer every time I change the propeller?
A3: It is highly recommended. The washer is a low-cost wearable part. Replacing it together with the propeller ensures optimal cushioning and coaxiality, extending the service life of the motor shaft and clamp.
Q4: Is this part compatible with all 60-inch drone blades?
A4: This washer is specially sized for 60-inch CW propeller assembly of agricultural drones. Please confirm your blade size and rotation direction before purchase.
Product Operate Guide
Step 1: Power off the drone — Completely power off and remove the battery to avoid any safety risk during disassembly.
Step 2: Remove the propeller clamp and blade — Loosen the propeller fixing bolt, take off the blade and the old washer.
Step 3: Clean the mounting surface — Wipe off dust, debris and worn residue on the motor shaft and mounting base to ensure flat installation.
Step 4: Install the new CW washer — Place the new 02-001-11012 gasket flat on the mounting position, ensure no skew or gap.
Step 5: Reinstall the propeller and clamp — Align the CW propeller correctly, install the clamp, and tighten the bolt with standard torque.
Step 6: Check stability — Rotate the blade manually to confirm smooth rotation without jamming or offset, then perform a low-speed test flight.
Product Video
