English
| Quantity: | |
|---|---|
Product Introduction
Multi-model Accurate Matching
Model 02-001-11013 CCW propeller washer fits perfectly: XAG P100 Pro, P60Pro, P60, P120, P200, P150, P150Ultra, P150ProI agricultural drones, dedicated for 60-inch CCW counter-clockwise propellers, 1:1 OEM size, direct installation without modification.
High Wear-resistant Modified Nylon Material
Made of reinforced wear-resistant engineering nylon, anti-extrusion, tear-resistant, resistant to pesticide mist corrosion, outdoor high temperature and sun aging. Long-term high-speed rotation will not crack, deform or pulverize, greatly extend the service life of propellers and propeller clamps.
Damping & Anti-shake Flight Optimization
Buffer the vibration between propeller and propeller clip during operation, eliminate eccentric shaking of blades, reduce drone fuselage vibration, make hovering & spraying flight more stable, lower motor load and power consumption, improve endurance performance.
Protect Propeller Root & Propeller Clamp
Fill assembly gaps evenly to prevent metal friction between blade root and propeller clip, avoid abrasion, gouging damage on carbon propeller root, reduce replacement frequency of expensive propeller drone spare parts and save maintenance costs for agricultural fleets.
Standard Installation Structure, Easy Replacement
Standard circular positioning structure, easy to disassemble and replace during daily drone maintenance on farms, no professional maintenance tools required, shorten equipment downtime in farming season.
Technical Parameters
Part Number: 02-001-11013
Specification: 60-inch CCW counter-clockwise propeller dedicated washer
Compatible Drones: XAG P100 Pro, P60Pro, P60, P120, P200, P150, P150Ultra, P150ProI
Material: Reinforced wear-resistant nylon
Function: Shock absorption, wear protection, positioning, gap filling
Property: Model exclusive non-universal accessory
Product Uses
Replacement for worn, cracked, aging original CCW propeller gaskets of XAG series drones;
Repair abnormal shaking, vibration, jitter and unstable hovering of drones during spraying operation;
Daily regular maintenance of agricultural drones, prevent eccentric wear of propeller roots in advance;
Agricultural maintenance stores stock drone spare parts for quick repair service.
A1: Suitable for XAG P100 Pro, P60Pro, P60, P120, P200, P150, P150Ultra, P150ProI models, only matches 60-inch CCW counter-clockwise propellers, not universal for all XAG drones. Confirm your drone model before buying.
A2: Fix propeller jitter, flight vibration, eccentric rotation, blade root wear, propeller clip scratching carbon propellers and other faults, stabilize flight attitude.
A3: Adopt anti-corrosion modified nylon material, resistant to pesticide fog, fertilizer liquid and outdoor weather erosion, adapt to complex farm working conditions.
A4: Simple replacement: remove the propeller clip, replace the old washer with the new CCW gasket, reset the propeller and fasten the propeller clip; install with convex side facing the propeller root.
Product Operate Guide
Cut off drone power, remove the propeller fixing bolt and take down the propeller clip;
Take out the old damaged washer, place the new 02-001-11013 CCW washer with convex side against the propeller root;
Reset the CCW propeller, install the propeller clip and tighten the bolt properly (apply thread locker appropriately);
Rotate the propeller manually to check smooth rotation without jamming, finish installation and test flight.
This is CCW counter-clockwise propeller dedicated washer, cannot be mixed with CW clockwise gasket;
Must select corresponding washer according to drone model, wrong model cannot be installed normally;
Do not over-tighten propeller bolts to avoid squeezing and deforming the nylon washer.
Product Video
